Select a category below to access fitting instructions documents.

  • Vertical Blinds

    Measure and Installation
    For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.

     Pdf button vertical blinds product instructions 

  • Curtain Tracks

    Measure and Installation
    For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.

    Pdf button curtain decorator fitting instructions Pdf button curtain standard fitting instructions

  • Honeycomb

    Measure and Installation
    For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.

  • Roller Blinds

    Pdf buttons fitting instructions  Pdf buttons fitting instructions

    For installation details please download the fitting instructions above, or see your local distributor for further measure and installation details.

    If installing on plaster or wallboard where possible pick up timber stud. If unable to locate stud, use a suitable wall plug or toggle for plasterboard to hold the brackets.

    Face / Architrave Fit:

    Spring Operated – the top edge of the brackets should be 35mm above the opening. Spring spade is always located on
    the left side for under roll and on the right for over roll blinds.
    Check your blinds pin measurement. This is the measurement from the end of the blind to the
    other, taken from the outside of the end pins. Position the brackets in the correct position:
    Chain Operated – the top edge of the brackets should be flush with the top of the architrave.
    Avoid affixing screws into the angle join of the architrave. Raise or lower the brackets if necessary to avoid this. 

    Recess Fitting:

    Side or Back fixing

    Position the bracket so that the to

  • Roman Blinds

    Measure and Installation
    For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.

    Pdf button roman fitting instructions

    Roman Blind Styles
    Orion - The Orion style has intermediate battens or sewn pockets.
    Dampier - The Dampier style does NOT have intermediate battens or sewn pockets.
    Click here to see Roman Blind Styles at a glance.

  • Venetians

    Measure and Installation
    For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.

    Pdf button cedar venetians fitting instructions Pdf button aluminium venetians fitting instructions

  • Panel Blinds

    Measure and Installation
    For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.

    Pdf button panel fitting instructions

    Panel Blind Styles
    Click here to see Panel Blind Styles at a glance.

  • Outdoor Blinds

    Measure and Installation
    For installation details please download the fitting instructions located at the bottom of this page, or see your local distributor for further measure and installation details.

    Pdf button wire guide fitting instructions Pdf button rope pulley fitting instructions Pdf button automatic awnings fitting instructions Pdf button clear pvc fitting instructions

    Pdf button crank strap downs fitting instructions Pdf button fixed guide fitting instructions Pdf button folding arm fitting instructions Pdf button side channel fitting instructions